English
日本語
Deutsch
Français
Español
Русский
Português
繁體中文
Italiano
한국어
ไทย
Tiếng Việt
Bahasa Melayu
Polskie
Shqiptare
عربي
Azərbaycan
Gaeilge
Eesti keel
Euskara
беларуская
български
íslenskur
Bosanski
فارسی
Afrikaans
Dansk
Filipino
Suomalainen
ខ្មែរ
ქართული
ગુજરાતી
қазақ
Kreyòl ayisyen
Hausa
Nederlands
Galego
Català
čeština
ಕನ್ನಡ
Hrvatski
Latinus
Latviski
ພາສາລາວ
Lietuvių
Română
Malagasy
Malti
मराठी
മലയാളം
македонски
Maori
Монгол
বাংলা
Hmoob
Zulu
नेपाली
Norsk
ਪੰਜਾਬੀ
Chichewa
Svenska
Српски
Sesotho
සිංහල
Esperanto
Slovenský
Slovenščina
Kiswahili
Türk
اردو
Hայերեն
Igbo
יידיש
नहीं।
Basa Sunda
Basa Jawa
Yoruba
አማርኛ
ଓଡିଆ
Татар
Frysk
Кыргызча
Corsu
Kurdî
Lëtzebuergesch
Kinyarwanda
IsiXhosa saseMzantsi Afrika
پښتو
Samoa
Gàidhlig na h-Alba
Türkmenler
ئۇيغۇرچە
Ōlelo Hawaiʻi
Kiniki
Shona
Bahasa Indonesia
The Boright BR-CP400 is a 400QT rotomolded cold plunge and ice bath tub developed for recovery studios, sauna operators, gyms, hotels, and backyard wellness buyers. It combines a one-piece LLDPE shell with PU foam insulation, a hinged insulated lid held by four cam latches, an interior seat step, and a ready-to-plumb chiller loop — so the same tub runs as an electrically chilled plunge or as a manually iced bath.
This page documents the development platform: the geometry, hardware layout and specification bands we are quoting to brands, distributors and private-label programmes now. Final dimensions and weights are locked at tooling sign-off; custom lid styles, port layouts, colours, branding and new mould development are supported.

BR-CP400 · 400QT cold plunge and ice bath tub in warm grey
A cold plunge tub has one job: hold water at 3–10 °C long enough for a full recovery session, and keep doing it season after season. A rotomolded shell answers that better than acrylic or inflatable designs because the tub wall, lid and insulation are produced in the same process — there is no liner to crack, no seam to leak, and no frame to rust.
The BR-CP400 uses a long, narrow footprint (1700 × 760 mm) so a single bather sits with legs extended and water at chest height, while the 680 mm wall height keeps splash inside the tub and lets the lid close as an insulating cover. Inside, a moulded step doubles as a seat and as the entry/exit ledge, which matters for older users and for sauna-to-plunge transitions.

Lid propped open · interior seat step · ready to fill
Development target specification. Values below are the design targets we are quoting for tooling and sampling. Confirmed dimensions, weights and test data are issued with the signed drawing set before mould cutting.
Buyers in this category are split between two operating models, and the BR-CP400 is built to serve both from the same mould. The two 3/4" bulkhead fittings are pre-installed on the lower wall, so a chiller or pump loop can be connected without drilling the shell on site; buyers who run an ice bath simply cap the ports and add ice.
Cold plunge — chiller loop
Water is circulated through an external chiller via the two 3/4" bulkheads and held at 3–8 °C. Insulated walls and lid slow heat gain, so the chiller cycles less and running cost stays low. Typical for studios, gyms and hospitality.
Ice bath — manual icing
Fill from a hose, add ice blocks or frozen water bottles, cap the ports. The PU-insulated wall holds temperature far longer than an inflatable tub, and the 1/2" drain valve empties the tub in minutes without tipping it.
Both setups share the same hygiene routine: the smooth rotomolded interior has no liner folds or seams to trap biofilm, and the drain valve sits at the lowest point of the floor so the tub empties completely.

Ice bath setup · deck installation · hinged lid propped open for the session
Hinged insulated lid, 4 cam latches
The lid is rotomolded with its own PU core, so closing it insulates the water surface rather than just covering it. Four heavy-duty cam latches pull the lid down evenly and hold it against wind and children; the hinge allows the lid to stay propped open during a session.
Pre-installed bulkhead ports
Two 3/4" brass bulkhead fittings for the chiller or pump loop, factory sealed and pressure-checked. No on-site drilling, no gasket guessing — the plumbing package is specified with the tub.
1/2" drain with ball valve
A brass ball valve on the lowest wall point empties the tub fast and closes fully, so partial water changes are practical. Valve and fitting materials can be swapped to suit the destination market.
Interior seat step
A moulded step inside the tub gives a seated depth for entry and exit and a resting ledge between rounds. It is part of the mould, not an insert, so it cannot come loose or harbour water underneath.
Thick PU-insulated wall
Roughly 40 mm PE wall plus PU foam keeps the cold side cold and stops condensation on the outside face — important indoors, where a sweating tub ruins floors and finishes.
Colour-matched hardware
Latches, hinges and lid badge can be colour-matched to the shell, or kept in a contrasting finish for a stronger retail look. Custom Pantone colours start at the quoted MOQ.

Bulkhead fittings and drain valve · factory sealed before shipment
400QT / approx. 378 L platform
A full-body plunge volume for one bather at chest depth, with roughly 300 L at the recommended fill line — enough thermal mass that a session does not warm the water noticeably.
Rotomolded, not assembled
Shell, seat step and lid rim come out of the mould as one piece. No liner, no welded seam, no frame — the failure points of inflatable and acrylic tubs are simply absent.
Outdoor-safe by construction
UV-stabilised LLDPE withstands sun, frost and hose water. The same tub works on a deck, in a yard, on a gym floor or on a trailer.
Serviceable plumbing
Bulkheads and valve are standard threaded fittings, replaceable with locally available parts — a real advantage for distributors supporting overseas end users.
Lid as a thermal cover
Closing the lid between sessions cuts evaporative and convective loss, keeps leaves and rain out, and makes the tub safe around children and pets.
OEM-ready surface
In-mould logo, laser-etched lid badge and EVA mat printing let a brand own the product without changing the mould.
Recovery & sauna studios
Pair with a sauna for hot–cold contrast therapy. Fixed plumbing, a lid and insulated walls suit a commercial floor where the tub runs daily.
Gyms & sports clubs
Post-training plunge for teams and members. The seat step and 680 mm wall height make entry safe for a wide range of users.
Hotels & wellness retreats
A guest-facing amenity that reads as equipment, not as an inflatable. Colour and badge customisation match property branding.
Backyard & residential
Deck or patio installation with a garden hose and a chiller, or ice from a local supplier. No permanent works required.
Physio & rehab clinics
Controlled cold exposure for recovery protocols, with easy draining and cleaning between patients.
Rental & event operators
Rotomolded shell survives transport and repeated setup; the lid closes the tub for storage between events.

Olive green shell · same platform, colour as a brand decision
The BR-CP400 is a development platform, which means the specification is still open. For brands entering the cold plunge category, we can adjust the tub length and depth, the lid style (hinged, split or roll-up cover), the number and position of bulkhead ports, the seat step geometry, latch type, and the colour and branding package — all before the mould is cut, at far lower cost than changing a mould afterwards.
Where a buyer needs a different footprint entirely — a round plunge barrel, a two-person tub, a tub integrated into a sauna bench — we quote a new aluminium mould with the same wall and insulation build. Existing rotomolded products in our range are also used as starting points for derivative designs.
Customisation scope on the BR-CP400
Shell colour & Pantone matching · in-mould logo · lid badge · latch finish · port count and position · valve type · seat step depth · tub length and wall height · packaging · EVA mat / step pad · accessory kit (hose, filter, thermometer, cover)
Boright Industries is a rotomolding manufacturer and OEM/ODM partner based in Ningbo, China. We produce rotomolded coolers, insulated containers, tool boxes and industrial shells, and we support product development from concept and mould design through prototyping, PU foaming, assembly and mass production.
For cold plunge and ice bath programmes, that means one supplier for the shell, the foam, the plumbing hardware and the branding — and a team that has already solved the details that decide whether a tub leaks, sweats or fails in the field.
Manufacturing Capabilities
What is the Boright BR-CP400?
The BR-CP400 is a 400QT (approx. 378 L) rotomolded cold plunge and ice bath tub in development at Boright Industries. It has a one-piece LLDPE shell, PU foam insulation, a hinged insulated lid with four cam latches, an interior seat step, and pre-installed 3/4" bulkhead ports for a chiller loop plus a 1/2" drain valve.
Is this product available to order now?
The platform is at development stage. We are quoting tooling, samples and mass production to brands and distributors who want to launch a cold plunge line; the specification is confirmed with the signed drawing set before mould cutting.
Can it work both as a chilled plunge and a manual ice bath?
Yes. The same tub serves both: connect a chiller or pump loop to the two 3/4" bulkheads and hold 3–8 °C, or cap the ports and add ice for a manual ice bath. The insulated wall and lid slow temperature gain in either setup.
How much water does it hold?
Roughly 300 L at the recommended fill line, against approximately 378 L of total internal volume. The fill mark is set so a seated bather is covered to chest height without overflowing when entering.
How is the tub emptied?
Through the 1/2" bulkhead drain with a brass ball valve at the lowest point of the floor. No tipping, and the tub drains completely for cleaning or relocation.
Does the lid make a difference?
Yes — it is rotomolded with its own PU core and held by four cam latches, so it insulates the water surface between sessions, keeps debris and rain out, and closes the tub for safety around children and pets.
What can be customised?
Shell colour and Pantone matching, in-mould logo, lid badge, latch finish, port count and position, valve type, seat step depth, tub length and wall height, packaging and the accessory kit. New footprints such as round barrels or two-person tubs are quoted as new moulds.
What is the MOQ and lead time?
MOQ is 1 pc for a sample and 20 pcs per colour for mass production. Sample and production lead times are quoted per project once the specification and tooling plan are agreed.
Cold Plunge / Ice Bath collection · Boright 55QT rotomolded cooler (BR-S55) · Hard coolers · Rotomolded coolers
Specifications on this page describe the BR-CP400 development platform and are subject to change at tooling sign-off. For drawings, samples or a quotation, contact the Boright sales team.
The Boright BR-CP400 is a 400QT rotomolded cold plunge and ice bath tub developed for recovery studios, gyms, hotels and backyard wellness buyers. Final dimensions and weights are confirmed at tooling sign-off.