English
日本語
Deutsch
Français
Español
Русский
Português
繁體中文
Italiano
한국어
ไทย
Tiếng Việt
Bahasa Melayu
Polskie
Shqiptare
عربي
Azərbaycan
Gaeilge
Eesti keel
Euskara
беларуская
български
íslenskur
Bosanski
فارسی
Afrikaans
Dansk
Filipino
Suomalainen
ខ្មែរ
ქართული
ગુજરાતી
қазақ
Kreyòl ayisyen
Hausa
Nederlands
Galego
Català
čeština
ಕನ್ನಡ
Hrvatski
Latinus
Latviski
ພາສາລາວ
Lietuvių
Română
Malagasy
Malti
मराठी
മലയാളം
македонски
Maori
Монгол
বাংলা
Hmoob
Zulu
नेपाली
Norsk
ਪੰਜਾਬੀ
Chichewa
Svenska
Српски
Sesotho
සිංහල
Esperanto
Slovenský
Slovenščina
Kiswahili
Türk
اردو
Hայերեն
Igbo
יידיש
नहीं।
Basa Sunda
Basa Jawa
Yoruba
አማርኛ
ଓଡିଆ
Татар
Frysk
Кыргызча
Corsu
Kurdî
Lëtzebuergesch
Kinyarwanda
IsiXhosa saseMzantsi Afrika
پښتو
Samoa
Gàidhlig na h-Alba
Türkmenler
ئۇيغۇرچە
Ōlelo Hawaiʻi
Kiniki
Shona
Bahasa Indonesia
The Boright BR-CP600D is a 600QT rotomolded two-person cold plunge and ice bath tub — the double-width version of the BR-CP400 platform. Two bathers sit facing each other on moulded benches inside one insulated tub, each with their own depth and entry step, sharing a single chiller loop.
It is aimed at couples, recovery studios running partner sessions, sports teams pairing athletes, and hospitality buyers who want one installed unit to serve two guests at a time. Final dimensions and weights are locked at tooling sign-off; colours, branding, lid style and new mould development are supported.

BR-CP600D · 600QT two-person cold plunge tub in warm grey
A single plunge tub is limited by throughput: one bather at a time, ten to fifteen minutes each. For a studio charging per session, or a couple who train together, a double-width tub roughly doubles the sessions a given footprint can serve — without doubling the plumbing, the chiller, or the installation work.
The BR-CP600D is 2000 × 1100 mm outside, against 1700 × 760 mm for the single. The extra width is used for two benches facing each other, so each bather has their own seat depth and entry ledge rather than sharing one. Water volume rises to roughly 500 L at the fill line, which also means the water holds temperature longer between chiller cycles.

Lid propped open · two moulded benches facing each other
Development target specification. Values below are the design targets quoted for tooling and sampling. Confirmed dimensions, weights and test data are issued with the signed drawing set before mould cutting.
Plumbing is identical to the single tub: two 3/4" brass bulkheads feed a chiller or pump circuit, and a 1/2" drain valve empties the tub from its lowest point. A larger water body actually helps — the chiller runs less often per session because the temperature rises more slowly with two bathers in it.
Partner and couple sessions
Two bathers enter at the same time from opposite ends, each with a bench and an entry ledge. No waiting turn on a narrow deck, no re-arranging the installation.
Studio throughput
Twice the bathers per chill cycle on one chiller and one install. For recovery studios and gyms this is the difference between a 45-minute booking block serving one guest or two.
Because the two benches are moulded into the shell rather than inserted, there are no loose parts to lose, no water trapped underneath, and no fixings to work loose in a commercial setting.

Two-person session · deck installation · lid propped open
Insulated lid, 6 cam latches
The lid is rotomolded with its own PU core and runs the full 2000 mm length. Six heavy-duty cam latches hold it down evenly across the wider span; the hinge lets it stay propped open during a session and closes as a thermal cover between them.
Two moulded benches
Each bather gets a seat moulded into the shell at opposite ends, with a step for entry and exit. Seat height and depth can be adjusted at tooling stage for the target market.
Shared chiller ports
Two 3/4" brass bulkheads feed one chiller loop for the whole tub — the same plumbing package as the single model, so a distributor can stock one accessory set.
1/2" drain with ball valve
A brass ball valve at the lowest point empties roughly 500 L quickly and closes fully for partial water changes between sessions.
Thick PU-insulated wall
Roughly 40 mm PE wall plus PU foam, so a 500 L body of cold water does not sweat on the outside face — the concern that decides whether a tub can live indoors.
Colour-matched hardware
Latches, hinges, lid badge and bench pads can be colour-matched or contrasted. Custom Pantone colours start at the quoted MOQ.

Bulkhead fittings and drain valve · factory sealed before shipment
600QT / approx. 568 L platform
Two adults at chest depth simultaneously, with about 500 L at the recommended fill line — thermal mass that keeps a duo session from warming the water.
Rotomolded, not assembled
Shell, two benches and lid rim come out of the mould as one piece: no liner, no welded seam, no frame, no inserts.
Outdoor-safe by construction
UV-stabilised LLDPE handles sun, frost and hose water. Deck, yard, gym floor or trailer — the same unit works.
Serviceable plumbing
Standard threaded bulkheads and valve, replaceable with locally available parts — important for distributors supporting end users abroad.
Lid as a thermal cover
Closing the lid between sessions cuts evaporative loss, keeps debris and rain out, and closes the tub for safety around children and pets.
OEM-ready surface
In-mould logo, laser-etched lid badge, EVA bench pads and mat printing let a brand own the product without changing the mould.
Couples & residential
One installed tub for two people, on a deck or patio, with a garden hose and either a chiller or ice.
Recovery & sauna studios
Partner sessions and hot–cold contrast therapy, with double throughput per booking slot.
Sports teams & gyms
Two athletes plunge together after training; the benches make entry safe across a wide range of users.
Hotels & wellness retreats
A guest-facing amenity that reads as equipment, not as an inflatable, and matches property branding.
Physio & rehab clinics
Two patients or a patient and therapist working a protocol, with easy draining and cleaning between sessions.
Rental & event operators
Rotomolded shell survives transport and repeated setup; the lid closes the tub for storage between events.
The BR-CP600D shares its wall build, plumbing and lid construction with the single BR-CP400, which keeps tooling and accessory costs down. Before the mould is cut we can adjust overall length and width, bench height and depth, lid style (hinged, split into two halves, or roll-up cover), latch count, port layout, colour and branding.
Where a buyer needs a different arrangement — a round barrel, a two-person tub with a shared central bench, or a tub built into a sauna bench — we quote a new aluminium mould with the same construction. Existing rotomolded products in our range are also used as starting points for derivative designs.
Customisation scope on the BR-CP600D
Shell colour & Pantone matching · in-mould logo · lid badge · latch finish · split or single lid · port count and position · valve type · bench height and depth · tub length and width · packaging · EVA bench pads · accessory kit (hose, filter, thermometer, cover)
Boright Industries is a rotomolding manufacturer and OEM/ODM partner based in Ningbo, China. We produce rotomolded coolers, insulated containers, tool boxes and industrial shells, and we support product development from concept and mould design through prototyping, PU foaming, assembly and mass production.
For a two-person plunge programme, one supplier covers the shell, the foam, the plumbing hardware and the branding — with a single family of parts shared between the single and double models.
Manufacturing Capabilities
What is the Boright BR-CP600D?
The BR-CP600D is a 600QT (approx. 568 L) rotomolded two-person cold plunge and ice bath tub in development at Boright Industries. It has a one-piece LLDPE shell, PU foam insulation, two moulded benches facing each other, a hinged insulated lid with six cam latches, two 3/4" bulkhead ports for a chiller loop and a 1/2" drain valve.
How do two people fit?
The tub is 2000 × 1100 mm outside, about 300 mm wider and 300 mm longer than the single BR-CP400. Each bather sits on a moulded bench at opposite ends, facing the other, with their own entry step. Working water volume is roughly 500 L at the fill line.
Is this product available to order now?
The platform is at development stage. We are quoting tooling, samples and mass production to brands and distributors launching a cold plunge line; the specification is confirmed with the signed drawing set before mould cutting.
Can it run as a chilled plunge and a manual ice bath?
Yes — same as the single model. Connect a chiller or pump loop to the two 3/4" bulkheads and hold 3–8 °C, or cap the ports and add ice. The larger water body holds temperature longer in either setup.
How is the tub emptied?
Through the 1/2" bulkhead drain with a brass ball valve at the lowest floor point. About 500 L drains without tipping the tub, so cleaning and relocation are practical.
Does the lid make a difference?
It is rotomolded with its own PU core, runs the full length and is held by six cam latches. It insulates the water surface between sessions, keeps debris and rain out, and closes the tub for safety around children and pets.
What can be customised?
Shell colour and Pantone matching, in-mould logo, lid badge, latch finish, split or single lid, port count and position, valve type, bench height and depth, tub length and width, packaging and the accessory kit. Other arrangements such as round barrels or a shared central bench are quoted as new moulds.
What is the MOQ and lead time?
MOQ is 1 pc for a sample and 20 pcs per colour for mass production. Sample and production lead times are quoted per project once the specification and tooling plan are agreed.
Single 400QT cold plunge / ice bath tub (BR-CP400) · Cold Plunge / Ice Bath collection · Boright 55QT rotomolded cooler (BR-S55) · Rotomolded coolers
Specifications on this page describe the BR-CP600D development platform and are subject to change at tooling sign-off. For drawings, samples or a quotation, contact the Boright sales team.
The Boright BR-CP600D is a 600QT rotomolded two-person cold plunge and ice bath tub developed for couples, recovery studios running partner sessions, sports teams and hospitality buyers. Final dimensions and weights are confirmed at tooling sign-off.