English
日本語
Deutsch
Français
Español
Русский
Português
繁體中文
Italiano
한국어
ไทย
Tiếng Việt
Bahasa Melayu
Polskie
Shqiptare
عربي
Azərbaycan
Gaeilge
Eesti keel
Euskara
беларуская
български
íslenskur
Bosanski
فارسی
Afrikaans
Dansk
Filipino
Suomalainen
ខ្មែរ
ქართული
ગુજરાતી
қазақ
Kreyòl ayisyen
Hausa
Nederlands
Galego
Català
čeština
ಕನ್ನಡ
Hrvatski
Latinus
Latviski
ພາສາລາວ
Lietuvių
Română
Malagasy
Malti
मराठी
മലയാളം
македонски
Maori
Монгол
বাংলা
Hmoob
Zulu
नेपाली
Norsk
ਪੰਜਾਬੀ
Chichewa
Svenska
Српски
Sesotho
සිංහල
Esperanto
Slovenský
Slovenščina
Kiswahili
Türk
اردو
Hայերեն
Igbo
יידיש
नहीं।
Basa Sunda
Basa Jawa
Yoruba
አማርኛ
ଓଡିଆ
Татар
Frysk
Кыргызча
Corsu
Kurdî
Lëtzebuergesch
Kinyarwanda
IsiXhosa saseMzantsi Afrika
پښتو
Samoa
Gàidhlig na h-Alba
Türkmenler
ئۇيغۇرچە
Ōlelo Hawaiʻi
Kiniki
Shona
Bahasa Indonesia
The Boright BR-CP500R is a round rotomolded cold plunge barrel — the third body style on the same platform, after the single BR-CP400 and the two-person BR-CP600D. A one-metre cylinder, a round insulated lid with five cam latches, an interior ring bench moulded into the shell, and the same chiller bulkheads and drain valve.
A round tub is chosen for footprint and access, not for lounging: it takes about one square metre of deck and can be entered from any side, which suits tight patios, small gym floors, rooftops and rental units. Final dimensions and weights are locked at tooling sign-off; colours, branding, lid style and new mould development are supported.

BR-CP500R · round cold plunge barrel in warm grey
A rectangular plunge tub needs its full length clear on one side, so the bather can sit with legs extended. A round barrel asks for a circle instead: roughly one metre in every direction, and entry from whichever side is free. On a small deck, next to a sauna door, or in a gym where equipment has to move, that is the difference between fitting and not fitting.
The trade-off is posture. In the barrel the bather sits upright on a ring bench, water to the shoulders, rather than reclining with legs out. Many users prefer it — it is the posture of a plunge, not a bath — and it keeps the tub shallow enough to empty and clean quickly.

Lid propped open · moulded interior ring bench · ready to fill
Development target specification. Values below are the design targets quoted for tooling and sampling. Confirmed dimensions, weights and test data are issued with the signed drawing set before mould cutting.
The barrel carries the same plumbing package as the other two models: two 3/4" brass bulkheads for a chiller or pump loop, and a 1/2" drain with a ball valve at the lowest point. A distributor can therefore stock one accessory set — hose, filter, cap, valve — across the whole cold plunge range.
Chiller loop
Water circulates through an external chiller via the bulkheads and holds 3–8 °C. Insulated wall and round lid slow heat gain, so the chiller cycles less.
Manual icing
Fill from a hose, add ice blocks or frozen bottles, cap the ports. The 1/2" drain empties the barrel in minutes without tipping it.
The round lid doubles as a thermal cover and a safety cover: closed between sessions it keeps debris and rain out, and the padlock eye lets operators lock the tub when the site is unattended.

Round barrel on a deck · entry from any side · lid propped open
Round insulated lid, 5 cam latches
The lid is rotomolded with its own PU core, so closing it insulates the water surface rather than just covering it. Five latches spread the load around the circle, and the padlock eye secures the tub on shared or commercial sites.
Interior ring bench
A step is moulded into the barrel wall around the base, so the bather sits at a controlled depth and has somewhere to stand when entering or leaving. No insert, no trapped water, no fixings.
Pre-installed bulkhead ports
Two 3/4" brass bulkheads, factory sealed and pressure-checked, positioned on the lower wall where a chiller hose will not kink.
1/2" drain with ball valve
A brass ball valve at the lowest floor point drains the barrel fully — practical for weekly water changes and for relocating the unit.
Ribbed wall, thick insulation
A ring of moulded ribs stiffens the cylinder, and roughly 40 mm PE plus PU foam keeps the cold side cold and stops condensation on the outside face indoors.
Stable, pallet-friendly base
The base is recessed with a small footprint so the barrel sits flat on decking and can be strapped to a pallet for export without a crate.

Bulkhead fittings and drain valve · factory sealed before shipment
One square metre footprint
Ø1000 mm takes a circle instead of a 2-metre runway — the smallest installation of the three body styles.
500QT / approx. 473 L working volume
Enough water for a shoulder-deep single plunge, with thermal mass that holds temperature between sessions.
Rotomolded, not assembled
Barrel, ring bench and lid rim come out of the mould as one piece: no liner, no welded seam, no frame.
Entry from any side
No designated front. On a crowded deck or gym floor the bather steps in from whichever edge is clear.
Serviceable plumbing
Standard threaded bulkheads and valve, replaceable with locally available parts — important for overseas distributors.
OEM-ready surface
In-mould logo, laser-etched lid badge and an EVA bench pad let a brand own the product without changing the mould.
Small decks & balconies
Where a 2-metre rectangular tub will not fit, a one-metre circle often will.
Home gyms & garages
Compact footprint next to a sauna or a rack; can be moved when the layout changes.
Recovery studios
A second plunge station beside the main tub, or the whole offer where floor space is tight.
Hotels & retreats
Guest-facing amenity that reads as equipment; colour and badge match property branding.
Physio & rehab
Controlled cold exposure with quick draining and cleaning between patients.
Rental & events
Cylindrical shell is easy to strap, load and set up repeatedly; the lid locks the tub between events.
The BR-CP500R shares wall build, insulation, plumbing and lid construction with the rectangular models, which keeps tooling and accessory costs down. Before the mould is cut we can adjust diameter and height, bench ring height and width, lid style (single hinged, split, or roll-up cover), latch count, port layout, colour and branding.
Where a buyer needs a different arrangement — a taller barrel for shoulder-depth plunge, a two-person round tub, or a barrel built into a sauna bench — we quote a new aluminium mould with the same construction. Existing rotomolded products in our range are also used as starting points for derivative designs.
Customisation scope on the BR-CP500R
Shell colour & Pantone matching · in-mould logo · lid badge · latch finish · diameter and height · bench ring height · port count and position · valve type · packaging · EVA bench pad · accessory kit (hose, filter, thermometer, cover)
Boright Industries is a rotomolding manufacturer and OEM/ODM partner based in Ningbo, China. We produce rotomolded coolers, insulated containers, tool boxes and industrial shells, and we support product development from concept and mould design through prototyping, PU foaming, assembly and mass production.
For a cold plunge range, one supplier covers the shell, the foam, the plumbing hardware and the branding — with a shared family of parts across rectangular and round models.
Manufacturing Capabilities
What is the Boright BR-CP500R?
The BR-CP500R is a 500QT rotomolded round cold plunge barrel in development at Boright Industries. It has a one-piece LLDPE barrel with a moulded interior ring bench, PU foam insulation, a round insulated lid with five cam latches and a padlock eye, two 3/4" bulkhead ports for a chiller loop and a 1/2" drain valve.
How much water does it hold?
About 473 L at the recommended fill line, against roughly 604 L of gross inner cylinder volume before the seat ring. The fill mark covers the seated bather to shoulder depth.
Why choose round instead of rectangular?
Footprint and access. A Ø1000 mm barrel needs roughly one square metre and can be entered from any side, where a rectangular tub needs a two-metre clear run in front of it. The bather sits upright rather than with legs extended.
Is this product available to order now?
The platform is at development stage. We are quoting tooling, samples and mass production to brands and distributors launching a cold plunge line; the specification is confirmed with the signed drawing set before mould cutting.
Can it run as a chilled plunge and a manual ice bath?
Yes. Connect a chiller or pump loop to the two 3/4" bulkheads and hold 3–8 °C, or cap the ports and add ice. The insulated wall and round lid slow temperature gain either way.
How is the barrel emptied?
Through the 1/2" bulkhead drain with a brass ball valve at the lowest floor point. It drains completely without tipping, which matters for a one-metre cylinder.
What can be customised?
Shell colour and Pantone matching, in-mould logo, lid badge, latch finish, diameter and height, bench ring height, port count and position, valve type, packaging and the accessory kit. Other arrangements such as a taller shoulder-depth barrel or a two-person round tub are quoted as new moulds.
What is the MOQ and lead time?
MOQ is 1 pc for a sample and 20 pcs per colour for mass production. Sample and production lead times are quoted per project once the specification and tooling plan are agreed.
Single 400QT cold plunge / ice bath tub (BR-CP400) · Two-person 600QT tub (BR-CP600D) · Cold Plunge / Ice Bath collection · Boright 55QT rotomolded cooler (BR-S55)
Specifications on this page describe the BR-CP500R development platform and are subject to change at tooling sign-off. For drawings, samples or a quotation, contact the Boright sales team.
The Boright BR-CP500R is a 500QT round rotomolded cold plunge barrel developed for small decks, home gyms, recovery studios and hospitality buyers who need a one-square-metre installation. Final dimensions and weights are confirmed at tooling sign-off.